DX-Soda Ash (Sodium Carbonate Anhydrous) | DX Oilfield Products, LLC

offshore oilfield,oilfield,oilfield additives,oilfield chemicals,oilfield circulation

DX-Soda Ash
(Sodium Carbonate Anhydrous)
CAS # 497-19-8



Description	DX-Soda Ash is sodium carbonate generally used to reduce soluble calcium in water-based drilling muds and makeup waters. It can also be used to increase pH and flocculate spud muds.
Advantages	Requires no Caustic Soda to raise pH Removes calcium in most drilling fluids at relatively small treatment levels Can be used in both freshwater and salt water applications Economical and widely available
Typical Properties	Appearance Sodium Carbonate (%) Density pH Specific Gravity Solubility (in H2O) Odor	White Granular Powder Minimum 99.6 57-65 lbs/ft³ 11.3 (1% solution) 2.53 (H₂O = 1) Completely None
Handling/Storage	This product can irritate the eyes and skin. When handling any chemical, good personal hygiene should be practiced. Please read the DX-Soda Ash material safety data sheet.
Packaging	DX-Soda Ash is packaged in 50-lb, multiwall, water-resistant bags.
Note	The information and data herein are believed to be accurate and have been compiled from sources believed to be reliable. It is offered for your consideration, investigation and verification. Buyer assumes all risk of use. DX Oilfield Products, LLC will not be liable for claims relating to any party’s use of our reliance on information and data contained herein regardless of whether it is claimed that the information or data are inaccurate, incomplete or otherwise misleading. Revised: 09.01.2014

DX Oilfield Products, LLC, 300 Jackson Hill Street, Houston, Texas 77007