Aluminum DiStearate is aluminum salt of stearic acid, also called aluminum stearate. It is an effective defoamer for many types of water based mud systems. It enhances the breakout of gas and air bubbles, minimizing the foaming tendency of the drilling fluid.
Product Advantages
Highly effective defoamer for virtually all types of water based mud
Effective at low concentrations
Easily prepared and added with materials available at the rig site
Minimal effect on rheology of water based mud
Recommended Treatment
It can be mixed with diesel or mineral oil at the rate of 5 to 10 lbs per 5
gallons of oil and then added by spraying small amounts on top of the
mud pit where foaming is evident. It can also be added directly as a
powder by shaking small amounts over the mud pit foam.
Typical Properties
Appearance
Fine White Powder
Water
1.5% Max
Aluminum
4.2% - 5.2%
Solubility
Insoluble in water; Soluble
in most hydrocarbons
Packaging
Aluminum DiStearate is available in 25 pound, multi-walled paper bags, 40 bags per pallet.
Note
The information and data herein are believed to be accurate and have been compiled from sources believed to be reliable. It is offered for your consideration, investigation and verification. Buyer assumes all risk of use. DX Oilfield Products, LLC will not be liable for claims relating to any party's use of our reliance on information and data contained herein regardless of whether it is claimed that the information or data are inaccurate, incomplete or otherwise misleading.
DX Oilfield Products, LLC, 300 Jackson Hill Street, Houston, Texas 77007