DX-ATH is an Aluminum Hydroxide powder suitable for a wide range of applications including drilling fluids, water treatment slurries, and flame-retardants/smoke suppressants.
DX-ATH can be mixed with DX-Magnesium Hydroxide to form a mixed-metal hydroxide (MMH) which is used as a nondamaging drilling fluid, metal-reaming fluid, and wellbore shale control.
Low corrosiveness, Non-toxic, Cost effective.
In MMH: High Shear-Thinning Properties, High Gel Strengths, High Yield Point, Low Plastic Viscosity.
Higher initial decomposition temperature, allowing for use under higher processing temperature situations.
White Granular Powder
Na2O (total, %)
Moisture (105°C, %)
Loss of Ignition (LOI, %)
2.42 (H2O = 1)
This product can irritate the eyes and skin. When handling any chemical, good personal hygiene should be practiced. Please read the DX-ATH safety data sheet.
DX-ATH is packaged in 50-lb, multiwall, water-resistant bags, and 2000-lb supersacks palletized.
The information and data herein are believed to be accurate and have been compiled from sources believed to be reliable.
It is offered for your consideration, investigation, and verification. Buyer assumes all risk of use. DX Oilfield Products, LLC
will not be liable for claims relating to any party’s use of our reliance on information and data contained herein regardless of
whether it is claimed that the information or data are inaccurate, incomplete, or otherwise misleading.
DX Oilfield Products, LLC, 300 Jackson Hill Street, Houston, Texas 77007